Pool Pavement Repair: Empty Pool(pool salt Chlorinator)
On the off chance that the plaster of your pool cracks far down on a wall or floor, or the crack is huge to the point that it should be cut, you will have to empty your pool before you can repair it.
Adhere to the detailed instructions for emptying a pool to avoid damaging your in-ground pool.
Put on protective goggles, hearing protection and sturdy work gloves and make certain to wear shut toe shoes.
Cut out the crack. Put the blade of the processor or stone saw on either side of the crack. Cut ½ inch down and diagonally to the cut to create a dovetail. Then extend the crack an inch on either end. Eliminate the plaster you have cut out.
Flush the crack and let it dry. At the point when it is dry, utilize the soft brush to dismiss any remaining dust or dirt.
Apply a bead of underwater sealant along the edges of the crack. Leave about ? of an inch for the plaster of paris you'll use to fill the crack.
Utilizing the folio gave, blend the pool plaster until it's the consistency of peanut butter -
sufficiently thick to stay in place, but not so thick that you can't spread it easily.
Utilize a damp grout sponge to lightly dampen the edge of the crack. Apply the pool plaster with a trowel or spatula, carefully press it into the crack, being careful not to create any air bubbles.
Utilize the edge of the trowel or spatula to scrape off any overabundance plaster. Dab the plaster with a damp grout sponge to try and out the surface structure.
Fill the basin. The plaster will harden better submerged. In case you won't fill the pool for a couple of hours (you may have several cracks to fix), cover the patched area with a damp towel or old sheets. On the off chance that the plaster of paris patch dries too rapidly, it can psychologist and tear again. (Saltwater chlorinator)
Covering it will prevent it from drying out until you fill the pool again.
Pool cleaning repairs: patching
It could be in excess of a crack or a small spot that necessities repairing. Sometimes the plaster bubbles or on the other hand falls off. For this repair, you will have to drain the pool.
Adhere to the detailed instructions on the most proficient method to drain a pool to hold your pool back from bursting.
Wear protective goggles, hearing protection and hard-wearing work gloves and make sure you wear long trousers, long sleeves and shut shoes.
Utilize the hammer and etch to eliminate any clearly free plaster.
Tap the floor of the pool with the wooden stick and listen for an empty sound that indicates all the more free plaster. On the off chance that you discover any, etch them up too.
Put away the eliminated plaster.
Utilize the etch to make a couple of indentations in the surface of the area you will be touching up.
This will help the new plaster stick to the surface.
Apply an acidic cleaning solution to the surface you will be working on. (On the off chance that the pool is empty, this is also a fun time to completely clean the pool with acid).
Measure out the area that you want to touch up so you can prepare sufficient pool plaster. https://kausoksila-attiki.gr
Blend the plaster of paris so it is the consistency of peanut butter - adequately thick to stay in place, but not so thick that you can't spread it easily.
In the event that necessary, add cement paint to match the shade of the current plaster.
Dab the area to be repaired with a wet (but not dribbling) grout sponge, or spray the area with a fine mist of water.
Apply the plaster with the pool trowel and press it into the breaks created with the etch and into the corners.
Press out any air pockets and smooth the surface with the trowel, working the edges into the encompassing pool surface.
Smooth the repaired area again with the trowel. In case it's hot outside or the patch has dried while waiting, spray it again with water prior to smoothing it.
Cover the patch (s) with wet sheets in case you won't top off the basin within 4 to 6 hours. Also, cover the patches while you work around the pool when it's hot outside to prevent them from drying out and contracting before they can harden underwater.
